ProMini clock shield with 7-segment bubble display

Update May 6, 2016: This kit is no longer offered until I get a new batch of QDSP-6064 displays (whose price seem to have jumped considerably).

This clock was designed as a ProMini shield. It comes as a mostly-SMD kit, based on DS1307 with battery backup and the QDSP-6064 7-segment LED "bubble" display.


The kit includes the following:
  • PCB
  • QDSP-6064
  • DS1307 SMD
  • 32kHz crystal
  • CR1220 coin battery
  • battery holder
  • 330 ohm resistor 0805 (8x)
  • tactile switch SMD (2x)
  • machined female pins



The assembled clock can be fitted with a LiPo battery shield for ProMini, as shown in this post (source code also provided there).
The current draw (measured at 20mA with an unmodified ProMini) can be minimized by removing the 2 LEDs on the ProMini board, as well as dimming the 7-segment bubble display through software (SevSeg library). One other way of maximizing the LiPo battery life cycle is by waking the clock from sleep mode at the press of the "minutes" button (on D2).

Schematic and board layout are shown below.




Comments

Post a Comment

Popular posts from this blog

How to Remove �Powered by Blogger� attribution From Blogspot Blog?

Image
                     Blogger initially add on every blog �Powered by Blogger" in Blogger footer. This dialogue called Attribution 1. It is optional and used to show copyright, credits and other information. You can remove this attribution widget and add your own information. Blogger not allow you directly to remove it because it is locked. If you have tried to remove this then you may of noticed this gadget is locked into you blog. There are three ways of removing "Powered by Blogger" from your BlogSpot blog. Method 1:  Using Unlock method Step 1. Log in to your Dashboard and go to your Blogger Dashboard. Step 2. Now go to Template > Edit HTML. Step 3. Tick the "Expand Widget Templates" checkbox. Step 4. Now Search (CTRL+ F) the following code: <b:widget id='Attribution1' locked='true' title='' type='Attribution'> Step 5. Replace true with false <b:widget id='Attribution1' locked='false' title='
Read more

Fritzing: an Electronic Design Automation software

Image
Fritzing is an open-source initiative to support designers, artists, researchers and hobbyists to take the step from physical prototyping to actual product. We are creating this software in the spirit of Processing and Arduino, developing a tool that allows users to document their Arduino and other electronic-based prototypes, and to create a PCB layout for manufacturing. The complementing website helps users to share and discuss drafts and experiences as well as to reduce manufacturing costs. Fritzing is essentially an Electronic Design Automation software with a low entry barrier, suited for the needs of designers and artists. It uses the metaphor of the breadboard, so that it is easy to transfer your hardware sketch to the software. From there it is possible to create PCB layouts for turning it into a robust PCB yourself or by help of a manufacturer. Why Fritzing is needed Physical prototyping tools have come a long way and already allow non-engineers to quickly turn their ideas in
Read more