Basic Arduino Due oscilloscope


Basic Arduino Due oscilloscope

Comments

Post a Comment

Popular posts from this blog

Experimenting with Numitron filament tubes

Image
A while ago I built a battery-powered single digit Numitron clock.  There was nothing challenging about it. Each segment of a Numitron takes less than 20mA, like a LED, and requires between 3.5V and 4.5V to light up. So the segments can be driven directly from the processor or other TTLs (shift registers etc). Since Numitrons behave so similar to (7-segments) LEDs, why not use one of my old LED matrix shields to multiplex 4 of them, I thought. And instead of the current limiting resistors, I would use Schottky diode s, to bring them even closer functionally to LEDs. I would even be able to use the same interrupt-based code for multiplexing. I started the practical experiment with just one Numitron. The 7 segments are driven by a 595 shift register and the common electrode gets grounded through a ULN2803 gate. The diodes insure the current flows in one direction only and they also guarantee a maximum voltage of 4.5V on each segment. In practice, multiplexing does not work...
Read more

How to Remove �Powered by Blogger� attribution From Blogspot Blog?

Image
                     Blogger initially add on every blog �Powered by Blogger" in Blogger footer. This dialogue called Attribution 1. It is optional and used to show copyright, credits and other information. You can remove this attribution widget and add your own information. Blogger not allow you directly to remove it because it is locked. If you have tried to remove this then you may of noticed this gadget is locked into you blog. There are three ways of removing "Powered by Blogger" from your BlogSpot blog. Method 1:  Using Unlock method Step 1. Log in to your Dashboard and go to your Blogger Dashboard. Step 2. Now go to Template > Edit HTML. Step 3. Tick the "Expand Widget Templates" checkbox. Step 4. Now Search (CTRL+ F) the following code: <b:widget id='Attribution1' locked='true' title='' type='Attribution'> Step 5. Replace true with false <b:widget id='Attribution1' loc...
Read more