profile photo updated
Popular posts from this blog
Experimenting with Numitron filament tubes
A while ago I built a battery-powered single digit Numitron clock. There was nothing challenging about it. Each segment of a Numitron takes less than 20mA, like a LED, and requires between 3.5V and 4.5V to light up. So the segments can be driven directly from the processor or other TTLs (shift registers etc). Since Numitrons behave so similar to (7-segments) LEDs, why not use one of my old LED matrix shields to multiplex 4 of them, I thought. And instead of the current limiting resistors, I would use Schottky diode s, to bring them even closer functionally to LEDs. I would even be able to use the same interrupt-based code for multiplexing. I started the practical experiment with just one Numitron. The 7 segments are driven by a 595 shift register and the common electrode gets grounded through a ULN2803 gate. The diodes insure the current flows in one direction only and they also guarantee a maximum voltage of 4.5V on each segment. In practice, multiplexing does not work...
Quality of Google ADK 2012 Code
We all want to have more Android automation in our homes. XDA Elite Recognized Developer AdamOutler set out to do just that and spent around 40 hours attempting to reduce and rewrite the code driving the ADK2012 into something which would be more moldable and bendable. He failed and he explains why in his rant which he calls the ADK2012 "The Worst Code Ever". So if you've ever wanted to work with Google Accessory Development Kit makes ure to check out this video. This will give you a little insight as to what trials and tribulations you may have with this resource. Before you engage in a head desk collision session, check out what Adam has to say.
Comments
Post a Comment